Drilling Rigs
  Hammers
  Truck Mounted Drilling Rigs
  Button Bits
  Backhoe Loaders
Versatile 400
  Self Propelled Skid Mounted Rig
  Pick-N-Carry Crane 5T
  Digging/Pole Erection Machine
  KLR Cluster Hammer
  Hand Pumps
  Mineral Water Units
  KLR Generators
  Route Map
   
 
KLR DTH DRILL RIGS
KLR 300 DTH/Rotary Drill Rig
KLR DR 100 Rotary Drill Rig
KLR 400 Meters DTH/Rotary Drill Rig
KLR-CDR 400 Core Blast Hole Drill Rig
QKH 46 Blast Hole Drill Rig
KLR DTH Drill Rigs
KLR 300 DTH/Rotary Drill Rig
Technical Specifications of KLR DTH Drill Rigs Standard Models
KLR Drill Rigs Standard Models
Standard Models KLR-1000 KLR-2000
1. Capacity 6’’-6.5’’ 8’’-10’’
A) Drilling Diameter 152 mm-165 mm 203 mm-254 mm
B) Drilling Mode DTH DTH/Rotary (Air/Mud)
2. Hydraulic Power Pack
Prime Mover 		Truck Engine (or) Separate Deck Engine Truck Engine (or) Separate Deck Engine
Rotation Speed (Max) 0 to 100 0 to 100
Truck (Max) 345 kgm. 600 kgm.
Feed System:
Pull Up Force (Max.) 7500 kgf. 11730 kgf.
Pull Down Force (Max.) 5200 kgf. 8020 kgf.
Rapid Speed (up) 24 m/min. 24 m/min.
3. Hydraulic System pump Gear/Van Type Gear/Van Type
Reservoir Capacity 300 ltrs. 400 ltrs.
4. Levelling Jacks 4 Nos. 4 Nos.
Stroke Length 610 mm. 610 mm.
5. Bottom Guide
Opening Standard 		270 mm. 330 mm.
6. Mast Suitable for Rod/ Cassing Handling 6 mtrs. 6 mtrs.
7. Water Injection Pump
Flow Max. 36 lpm. 55 lpm.
Pressure 425 psi. 600 psi.
8. Air Line Lubricator Venturi Type Venturi Type
Max. Pressure 450 psi. 450 psi.
9. Oil Cooler Type Hydraulic Driven
Fin Type Oil to Air 		Hydraulic Driven
Fin Type Oil to Air
Options: * Winch, Rod Changer & Jib Hoist
* Two Speed Hydraulic switch over Rotary Head
* Combination Rotary Head for DTH, Rotary & Core Drilling
* 5T heavy duty hoist
* Mud Pump-Engine or Hydraulic Driven
* Night Lights
* Welding Generator-Engine or Hydraulic Driven 		KLR-2000 requires higher capacity engine for providing Hydraulic Drive for Mud Pump